Bimba STP-10 Manual do Utilizador descarregar pdf (Página 5)

STP-10 Hardware Manual

Getting Started

This manual describes the use of six different drive models. What you need to know and what you must have depends on the

drive model. For all models, you’ll need the following:

• A 24-48 volt DC power supply. Please read the section entitled Choosing a Power Supply for help in choosing the right power

supply.

• A compatible Bimba stepper motor. See section on Recommended Motors.

• A small at blade screwdriver for tightening the connectors (included).

• A personal computer running Microsoft Windows 98, 2000, NT, Me, XP, Vista or 7.

• A Bimba programming cable (included with non-Ethernet drives).

• For Ethernet drives, you will need a CAT5 cable (not included).

• Relevant software applications, as outlined below. All software is available as a free download from www.bimba.com.

If you’ve never used a STP drive before, you’ll need to get familiar with the drive and the set up software before you try to deploy

the system in your application. We strongly recommend the following:

1. For -S drives, -Q drives, and -EIP drives, install the IQ

Stepper software application. Bimba IQ

stepper contains a link to the

Programmer software applications.

2. Launch the software by clicking Start...Programs...Bimba...

3. Connect the drive to your PC using the programming cable. For RS-232 drives, select the correct COM port. For Ethernet

drives, ensure that the IP address is correct. See page 7 of this manual for more information on “Connecting the Drive to Your

PC using Ethernet.”

4. Connect the drive to the power supply.

5. Connect the drive to the motor.

6. Apply power to the drive.

7. The software will recognize your drive, display the model and rmware version and be ready for action.

The connectors and other points of interest are illustrated below. Depending on your drive model and application, you’ll need to

make connections to various parts of the drive. These are detailed later in the manual.

screw terminal

connector

• motor

• power supply

DB-25 connector

• digital inputs

• digital outputs

• analog input

screw terminal

connector

• optional RS-485 port

HD-15 connector

• optional encoder feedback

RJ11 connector

• RS-232 port

LEDs

• status & error codes

grounding

screw

spring terminal

connector

and rotary switches

RJ45 connector and

rotary address switch

• optional Ethernet interface

1 2 3 4 5 6 7 8 9 10 ... 38 39

Comentários a estes Manuais

Sem comentários

Bimba STP-10 Manual do Utilizador Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Bimba STP-10