Bimba SPCS Manual do Utilizador descarregar pdf (Página 3)

2014.01.23 rev4 3

SPCS Introduction

Introduction

The Servo Pneumatic Control System (SPCS) is a high ow pneumatic motion control valve that when

combined with a position feedback actuator provides a “closed loop” positioning control system that

quickly and accurately positions a payload.

System conguration and setup is completed by using a standard USB connection and Bimba’s SPCS

software. The valve is IP65 compatible and can be used with both linear and rodless actuators with either

an internal or external positioning transducer.

Software, System Connection and Setup

Flowchart outlining software download and establishing valve communications.

Is the valve now

selectable?

SPCS2 FLOWCHART

Download and install

SPCS USB Interface

from Bimba’s Website

(see section 1)

Open SPCS Interface

(see section 2)

Did the Interface Open?

Select the COM port the

SPCS is connected to

Reinstall the program Open interface

Did the

interface open?

Contact Bimba Support

or your IT personnel

Was the SPCS valve

available for selection

on the dropdown

menu?

Enable connection

to valve

You have successfully

installed the software/

driver!

Conrm power

is applied to the

valve

Conrm

MB cable

connection

Is the

valve now

selectable?

Go to the Drive

troubleshooting

(see section 3)

If this worked, go

back to COM port

selection

Does it

work now?

Yes

Contact Bimba

Support

Yes

1 2 3 4 5 6 7 8 ... 18 19

Comentários a estes Manuais

Sem comentários

Bimba SPCS Manual do Utilizador Página 3

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Bimba SPCS